Pentx SMC

7 layers Super Multi Coating

Refraction and Partial Reflection
Light refracts (bends) when it travels through a border between two transparent substances with different densities.
In particular, it bends when leaving air and entering glass and also when leaving glass and entering air.
Under ideal conditions all light will bend, but in real life about 95% bends and 5% is reflected back into the first substance.

With photographic lenses this is a serious problem because less light reaches the film surface.
For a lens with an optical groups (hence 2n refraction surfaces) and coefficient of refraction r (the percentage of refracted light divided by 100),
only a fraction L reaches the film, and L = r 2n. For r = 0.95 and n = 10, L = 0.36.
This means that only 36% of the light reaches the film. The rest is scattered around, and some of it results in undesirable ghost images or flare.

Super Multi-Coating
To combat the undesirable consequences of partial reflection, scientists developed chemical coatings to be applied to glass surfaces.
These coatings increase r, and in the case of Pentax's famous Super Multi-Coating (SMC), r = 0.998!
Performing the above calculation for a lens with 10 groups, we get L = 0.96, or only 4% light loss.

SMC was patented and first applied in 1971, when Pentax was still making screw mount equipment.
To highlight the fact that the lens elements were super multi-coated, Pentax renamed their lens lines from
Takumar and Super-Takumar to Super-Multi-Coated Takumar and later on to SMC Takumar.

Nowadays, with K-mount equipment, SMC is used for lens, filters, some body optics and various accessories.
Most Pentax lenses are SMC-coated. All SMC-coated lenses have "SMC" in their name.
The few lenses that do not have SMC are low-budget items, and bear no "SMC" in their name.
They all have some form of coating, some of them even multi-layer, but not the patented SMC.

Benefits from SMC
In reference 06671, Pentax claims that SMC is "a remarkable seven-layer lens coating process that cuts the reflection ratio down to just 0.2% per lens surface.
The result is a dramatic improvement in both color fidelity and brightness and the elimination of flare and ghost images."
In the meantime, all optics manufacturers have developed some form of surface coating, and each claims "superior performance." In practice,
most tests point that Pentax's SMC is still the best of all mainstream solutions".

Lukk vindu